Descripción

Spring-force acting pressure-reducing valve with difference pressure piston. Multi-part design made of stainless steel, not back-controllable.FunctionThe discharge pressure acts upon the piston. The power resulting from this pressure compresses the spring as soon as it exceeds the spring resistance, thus closing the valve. This position persists as long as no medium is taken off the discharge pipe. Thus, the discharge pressure is kept at the value required by the setting.When media are taken off the discharge pipe the discharge pressure is reduced. The spring presses the diaphragm and causes opening of the valve. If the medium flows for a longer time, a self-adjustment of the valve opening will ensue instead of an abrupt succession of opening and closing movements. Pressure reducing valves for gaseous media have a damping device against pressure impacts.Settings Setting of the pressure reducing valve always takes place without flow, the manometer showing static pressure.Rising discharge pressure:Turn the set screw clockwise.Reducing discharge pressure:Turn set screw counter-clockwise. Take off some medium, thus reducing the pressure. Then tighten the screw until required pressure is attained.Decreasing pressure during media take-off is normal, it is caused by loss of pressure.You can order other pressure reducers online in our shop.
SKUDK340406304/DA
DescriptionPiston pressure Reducer DN25, stainless steel / EP, Inlet pressure: max.25bar, outlet pressure: 3-7.5b
Weight [kg]7.330000
Nominal sizeDN025
Body materialStainless Steel
Body material0
Seals materialEPDM-PTFE/DA - max. 200°C
Stem seals material0
Connection typeFlange Connection
Connection size25
Media temperature min. [°C]-20
Media temperature max. [°C]+200
Gehäusedesign0
''